Samsung SyncMaster 730XT User Manual page 14

Rear
The configuration at the back of the monitor may vary from product to product.
POWER IN port Connect the power cord for your monitor to the power port on the back of
the monitor.
VGA IN port Connect the signal cable to the 15-pin, D-sub port on the back of your
monitor.
RS-232C Connection Connect a RS-232C cable to this terminal.
Terminal
VGA OUT port Connect a monitor to another monitor through a D-Sub cable.
Kensington Lock The Kensington lock is a device used to physically fix the system when
using it in a public place.
Cable Fix Ring When connecting the cable is finished, fix the cables to the Cable Fix Ring.
Earphone jack [ ]
The Microphone
connection terminal (MIC)
The locking device has to be purchased separately.
For using a locking device, contact where you purchase it.
Headphone connection terminal.
Connect a microphone to the MIC terminal.