Samsung SyncMaster 540B User Manual page 24

Simple stand
(The configuration at the back of the monitor may vary from product to product.)
POWER port
DVI IN port
RGB IN port
POWER on/off Switch
(option)
Kensington Lock
See Connecting the Monitor
Connect the power cord for your monitor to the power port on the back
of the monitor.
Connect the DVI Cable to the DVI port on the back of your monitor.
Connect the signal cable to the 15-pin, D-sub port on the back of your
monitor.
Use this button for turn the monitor on and off.
The Kensington lock is a device used to physically fix the system
when using it in a public place. (The locking device has to be
purchased separately. )
For using a locking device, contact where you purchase it.
for further information regarding cable connections.
Sliding Stand