Samsung SyncMaster 400DXn Owner's Manual page 39

Note
• You can control your monitor by allowing it to receive the remote control signals of other devices through
the REMOTE OUT terminal.
• You can control a device by allowing it to receive remote control signals from other devices through the
REMOTE IN terminal.
Note
• Restrictions: Available only if other devices support the wired remote control I/O terminals.
Connecting HDMI
Note
• Input devices such as digital DVD are connected to the HDMI IN terminal of the monitor using the HDMI
cable.
Note
• You cannot connect a PC to the HDMI IN terminal.
Connecting Using a DVI to HDMI Cable
1) Connect the DVI output terminal of a digital output device to the HDMI IN terminal of the monitor using a
DVI to HDMI cable.
2) Connect the red and white jacks of an RCA to stereo (for PC) cable to the same colored audio output
terminals of the digital output device, and connect the opposite jack to the HDMI / PC / DVI-D AUDIO IN
terminal of the monitor.
Connecting a LAN Cable