Samsung SyncMaster 400DXn Owner's Manual page 33

Safety Instructions
Introduction
Connections
Installing the Stand KIT
Connecting the LCD
Display
Using the Software
Adjusting the LCD Display
Troubleshooting
Specifications
Information
Appendix
The color and appearance of the product may vary depending on the model, and the product specifications are
subject to change without prior notice for reasons of performance enhancement.
Connections
Note
• Only the supplied bolts should be used.
Caution
Samsung Electronics will not be responsible for damages caused by using a base other than those
specified.
Installing the Semi Stand
1) To protect your product, a Cover Hole is included as an accessory. This protects the hole at the bottom of
the monitor where the stand is inserted. If you install a wall mount kit for your monitor, please place the
Cover Hole over it.
2) Insert it into the hole at the bottom of the monitor. Insert the screw provided with the Cover Hole into the
marked place and fasten it firmly.
Caution
The resolution may differ for each product model. For information on the optimal resolution, refer to the user
manual.
Select Language
Installing the Stand KIT
Left stand
Caution
Make sure to install the stand with the Caution label
folded backwards.
Main Page
Model
Right stand