Wall Bracket Installation - Samsung SyncMaster 400DXn Owner's Manual

For securing the bracket on a wall, use only machine screws of 6 mm diameter and 8 to 12 mm length.

6. Wall Bracket Installation

Contact a technician for installing the wall bracket.
Samsung Electronics is not responsible for any damages to the product or harm to customers when the
installation is done by the customer.
This product is for installing on cement walls. The product may not stay in place when installed on plaster or wood.
Components
Only use the components and accessories shipped with the product.
`
Wall Bracket
(1)
Wall Bracket Assembly
There are two hinges(left and right). Use the correct one.
Hinge Plastic Hanger
(Left 1, Right 1)
Screw(A) Screw(B)
(4) (11)
Insert and tighten the Captive Screw in the
direction of the arrow.
When done, mount the wall bracket on the wall.
A. Captive Screw
B. Wall Bracket
C. Hinge (Left)
D. Hinge (Right)
Before drilling into the wall, check if the length
between the two locking holes at the back of the
product is correct.
If the length is too short or long, loosen all or
some of the 4screws on the wall bracket to adjust
the length.
A. Length between the two locking holes
Anchor
(4) (11)