Advertisement
Quick Links
HT705GR Tier 2 APS
QUICK START GUIDE
3. Plug powered-down electronic devices in to appropriate outlets.
Gaming Console
Cable Box DVR
with Hard Drive
5. Place glossy side of IR sensor in sightline of remotes.
1. Turn power switch to OFF.
/
TV
PEEL
SETUP:
DVD Player
Gaming Console
without Hard Drive
Audio Equipment
2. Plug surge protector into wall.
4. Connect infra-red (IR) sensor to surge
protector into small input jack.
6. Turn power switch to ON.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for CyberPower HT705GR
Summary of Contents for CyberPower HT705GR
- Page 1 SETUP: 1. Turn power switch to OFF. 2. Plug surge protector into wall. HT705GR Tier 2 APS QUICK START GUIDE 3. Plug powered-down electronic devices in to appropriate outlets. 4. Connect infra-red (IR) sensor to surge protector into small input jack.
- Page 2 3. Press IR sensor 2 times, pausing in between. 4. LED light will flash 1 time, This document is believed to be accurate, but CyberPower reserves the right to change or correct the contents and does not assume and timer will be 1 hour.
Need help?
Do you have a question about the HT705GR and is the answer not in the manual?
Questions and answers