Page 2
Place glossy side of IR sensor in sightline of remotes. Turn power switch to ON using green rocker switch. LED indicators (Protected & Grounded) should illuminate. 2. Power-Saving Measurement Initialization: The HT705GR performs a power-saving detection measurement after the green rocker switch is turned ON. The Energy-Saving outlets will be turned on for 10 seconds, and the energy-saving LED indicator will illuminate at the same time.
2 Wide-Spaced Outlets 8 Ener SPECIFICATIONS 9 IR S 10 IR S • Model Number: HT705GR 11 Wid • Outlets: 2 Always-On outlets & 5 Energy-Saving outlets (5 Standard Outlets and 2 Transformer spaced outlets ) • Surge Protection: 1500 Joules •...
Page 4
3. You must provide a dated purchase receipt (or other proof of the original purchase) for the CyberPower unit and connected equipment. You also need to provide a description of the damage to your connected equipment.
Page 5
HT705GR CONT. LIMITED WARRANTY AND CONNECTED EQUIPMENT GUARANTEE CONT. Who pays for shipping? We pay when we send items to you; you pay when you send items to us. What are some things this warranty does not cover? THIS WARRANTY DOES NOT COVER ANY SOFTWARE THAT WAS DAMAGED OR NEEDS TO...
When switching surge off/on again assure all connected equipment are placed in power-off or standby mode. • Turn off the HT705GR power, re-plug the IR Sensor The IR Sensor is not operating. cable, then turn on the HT705GR •...
HT705GR CONT. TECHNICAL SUPPORT Please contact our tech support department with installation, troubleshooting, or general product questions. • Phone: 1.877.297.6937 • Email: tech@cpsww.com • Hours of Operation: Monday – Friday, 7:00 am – 6:00 pm CST PRODUCT REGISTRATION Prompt product registration assures coverage under the lifetime limited warranty, and also allows the opportunity to be notified of product enhancements, upgrades, and other announcements.
Page 8
Cyber Power Systems (USA), Inc. | www.CyberPowerSystems.com For USA and Canada | 4241 12th Ave East, Suite 400, Shakopee, MN 55379 | Toll-free: 877.297.6937 For all other regions | Please visit our website for local contact information. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inference received, including interference that may be undesired operation.
Need help?
Do you have a question about the HT705GR and is the answer not in the manual?
Questions and answers