Hitachi LP-EU5002 User Manual page 104

Troubleshooting
Phenomena that may be easy to be mistaken for machine defects (continued)
Phenomenon
104
Cases not involving a machine defect
The signal cables are not correctly connected.
The brightness is adjusted to an extremely low level.
The computer cannot detect the projector as a plug-
and-play monitor.
The BLANK screen is displayed.
BLANK
COMPUTER IN2 is set to MONITOR OUT.
COMPUTER IN2
The projector does not recognize the USB storage
device inserted into USB TYPE A port.
The projector is not receiving a signal from the remote
control. (frequency)
MHL STANDBY PWR. function is not working.
USB TYPE A
Reference
page
~
38
10
32
47
12