Mounting Guide; D-Sub Connector Pin Assignments - Samsung STM-17LV Instruction Manual

USER N @ 3 @ @ @ MANUAL
J 5 . Y
OSD :
H. Position - Move the OSD position to right( ) or left( ).
V. Position - Move the OSD position to up( ) or down( ).
Transparency - Select the OSD background.
OSD Timer - Select the OSD display timing.
Language - Select a language among
English, Français, Deutsch, Español, Danish, Italiano.
Color (PC Mode) :
Color Temp - Adjust color temperature to 9300, 6500, user.
(note : 9300 is factory default)
Red - Adjust red color for user.
Green - Adjust green color for user.
Blue - Adjust blue color for user.
Utility :
Recall - Select to reset all setting to the factory default values.
Lock - Select ON or OFF
(ON : Control key lock. OFF : Control key unlock)
Exit : Turn off OSD Menu.
8
USER N @ 3 @ @ @ MANUAL
J 5 . Y

MOUNTING GUIDE

Wall mountable using two methods:
1) Using the 200 mm pre-cut holes
2) Using the VESA standard wall mount design and the 100mm hole pattern on the back panel to install the LCD
monitor to the wall.

D-SUB CONNECTOR PIN ASSIGNMENTS

• PIN ASSIGNMENTS
Pin 1 RED VIDEO Pin 9
Pin 2 GREEN VIDEO Pin10
Pin 3 BLUE VIDEO Pin 11
Pin 4 GROUND Pin 12
Pin 5 GROUND Pin 13
Pin 6 RED GROUND Pin 14
Pin 7 GREEN GROUND Pin 15
Pin 8 BLUE GROUND
• ACCESSORY
1. POWER CORD 2. USER'S MANUAL
5. Remote Control 6. Batteries
Wall
Pad
Arm
Monitor
SIGNAL CABLE DETECT
GROUND
SAD(for DDC)
D-SUB
H-SYNC.(or H+V SYNC.)
V-SYNC
SLC(for DDC)
3. PC cable 4. Adaptor
7. Wall mount (Option) 8. Rack mount (Option)
9