Main Characteristics; Certification - Pogo 36 Owner's Manual

1. Main Characteristics

Draft: Swing-keel:

2. Certification

Your boat has been built in France in compliance with the essential requirements of the European
Recreational Directive 2013/53/EU.
The different equipment of your ship such as the rudder system, the fuel tank, hoses... are also
certified and in accordance with the current European standards.
This boat has been designed for category A with a limited number of passengers; 6 persons, in
accordance with ISO 12217-2.
A boat of Category A is considered as being designed for use when the conditions may exceed wind
force 8 (Beaufort scale) and significant wave heights of 4 meters and above, but excluding abnormal
conditions as storms, violent storms, tornadoes, or other extreme sea conditions or enormous
waves.
Users of this boat are informed that:

All passengers must be trained

The boat must not be loaded more than recommended by the shipyard.

There must be enough water clearance to sail

Stability is reduced if you add some load in the upper parts of the boat.

In bad weather conditions, all hatches, lockers and doors must be closed to avoid water
in-take.

Stability can be reduced when the boat is towing or lifting important loads with help of
her davit or boom.
Length: 10.86m
Beam:
Displacement: 3800kg
1.18m/2.95m
Fixed keel:
Air draft : 17.13m
Square-top-Main: 44m²
Classic Main: 35m²
Solent: 37m²
Spinnaker: 120 m²
Carbon or Aluminium mast
4m
2.1m
3