１） Before Use; ２） For Safe Use - HIOS Neji Taro III HS III-10 Instruction Manual

1） BEFORE USE
Thank you very much for selecting our Automatic Screw Feeder "HS III series". Please check the following accessories before
operating the machine.
• CD-ROM, 1
• AC adapter, 1 piece
• Hexagonal wrench, 1 piece
• Screwdriver, 1 piece
* For feeder machines purchased outside of Japan, no adaptor will be supplied with the feeder.
Please purchase a separate adapter with equivalent output specification as required.
2） FOR SAFE USE
Read the following Cautions thoroughly for the safe use of this machine. Keep them in mind during the operation of the machine
in order to prevent injuries and damage to property.
Installation
Caution: I nstallation Install the machine on a level, stable location that can endure it's weight and running conditions. If the
machine falls down or turns over due to improper installation, injuries or property damage may occur.
Operating Environment
Caution: D o not operate this machine where flammable or corrosive gas is present. It is extremely dangerous to use this
machine under such circumstances. Do not operate this machine in environment of high humidity.
AC adapter
For feeder machines purchased outside of Japan, no adaptor will be supplied with the feeder. Please purchase separate adapter
with equivalent output specification as required.
- 1 -