Table of Contents
Advertisement
6） REPLACEMENT OF CONSUMABLE PARTS
Replacement of brushes
• If the tip of the brush wears out and does not wipe off a screw
from an abnormal position, replace it with a new brush.
• Turn the machine's power switch on and off and position the
brush as in the diagram on the right. (Position it so that the Brush
assembly mounting screws can be easily removed.)
• After reassembly, ensure that the brush and the passage plate do
not clash when the Brush assembly moves. The gap is ideally "0" .
• Refer to P. 5, "Check/adjustment of the brush" for mounting
adjustments.
Part number of brush assembly:
• HS3-02053
Brush bracket#2
- 13 -
Brush assembly
attaching screw
Power switch
Brush assembly
Passing plate
Brush
When the brush is
operating, it should not
come in contact with the
passing plate.
Hex socket head small bolt
M2.6×10
Spring washer
M2.6
Plain washer
M2.6
Brush bracket#1
Brush
Advertisement
Table of Contents
