Eastey SB-2EX-SEMI User Manual page 29

Problem
Stuck carton
Uneven or poor tape cuts
Uneven Tape Leg on Front
Uneven or Torn Tape
Tape Folding
Solution
 Check drive belt width adjustment.
 Check for proper height adjustment.
 Adjust knife arm spring tension.
 Adjust wipe roller spring tension.
 Replace cutting knives.
 Tape tension is too low. Tighten the one-way
clutch roller and/or the tape core.
 Adjust the one-way clutch roller in the slot so it
is slightly beyond the front wipe roller.
 Adjust the tape leg length. See Tape Leg
Adjustment section.
 Blade is dull. Replace Blade.
 Tape tension is incorrect. Increase tension.
 Clean and adjust blade.
 Blade mounted incorrectly or backwards.
 Knife arm spring is worn. Replace knife arm
spring.
 Adjust cartridge height.
 Check that all rollers turn freely.
 Check to be sure tape is threaded properly on
front roller (refer to Tape Head User's
Manual).
Troubleshooting 29