26 Adjustments
Machine Body Height Adjustment
To adjust the leg height, loosen the screws on each leg and slide the insert up or down.
When the leg is at the desired height, retighten the adjustment screws to secure the leg
height.
Adjustment
Screws
CAUTION!
Tape Head Adjustment — Refer to Tape Head User Guide.
Refer to instructions in the Tape Head User Guide that is provided with the tape head
for instructions regarding adjustment information for the tape head.
Ensure the case taper is secure and will not shift while
adjusting leg height.
Loosen
screws,
slide leg
insert up
or down,
and then
retighten
screws to
secure at
required
height.