OPERATING INSTRUCTIONS CHARGING THE BATTERY 1. Insert the plug end into 120V power source. The LED indicator will be steady green indicating the charger is now in “stand-by” mode and ready to charge the battery. Do not plug the charger into a gener- ator as this will likely cause the fuse in the charger to short, and will not operate.
Page 6
OPERATING INSTRUCTIONS Slide the battery into the handle until you hear a click. Before using the tool, check that the moveable piston is in its rest position (fully retracted, by actuating the retract trigger). “Loos” battery driven, hand held, open jaw swaging tool has a pow- erful 6 Ton output which will crimp the 3/32, 1/8, 3/16 inch copper oval sleeves on the corresponding sizes of wire rope.
Page 7
OPERATING INSTRUCTIONS The following chart indicates to number of compressions for each size sleeve to obtain maximum holding strength. Select the proper cavity size for the sleeve to be swaged. Use only 3/32 sleeves with 3/32 cavity, 1/8 sleeve with 1/8 cavity and so on. (For lap slices at least two oval sleeves should be used).
IMPORTANT OPERATING PRECAUTIONS Ensure that you have read and understand the safety instruc- tions included in this manual before you operate the tool. Check whether the tool is damaged. Before using the tool, al- ways carefully check that parts are functioning correctly. Check that moving parts do not become stuck and are not damaged.
IMPORTANT OPERATING PRECAUTIONS PRECAUTIONS FOR THE BATTERY CARTRIDGE 1. Do not short circuit the contacts or expose the cartridge to water, oil or solvents. 2. Do not disassemble or attempt to repair the battery cartridge or dis- pose of in a fire. 3.
WARRANTY Huskie Tools products carry a warranty that makes us a leader in the tool industry. No other manufacturer dares to back its tools as we do. All Huskie REC-SERIES battery-operated products carry a 5-year warranty. The ECO-SERIES battery-operated products carry a 1-year warranty.
Page 14
WARRANTY (CONT.) Huskie reserves the right to determine all warranty claims. Huskie will not waranty tools containing parts or batteries not originally supplied by Huskie. Failure due to misuse, improper maintenance, misapplication, not following instructions or warnings, abuse or repairs attempted by anyone other than Huskie Tools, Inc.
WARRANTY (CONT.) Complete Support Services Our customers have direct access to us for training, service, and problem solving. As specialists in tools, we maintain a trained repair staff and a large stock of parts. This contrasts with many tool suppliers who carry tools as a sideline without offering support services.