Windows 98; Windows 95 - Samsung 770TFT, 870TFT, 170T Owner's Instructions Manual

Setting up Your LCD Monitor
®
Windows 98
®
1
Windows 98 will auto-detect your new monitor and start the "Add New Hardware
Wizard" if the drivers are not already installed. Click the NEXT button to search for
drivers.
2
Check the diskette drive box to install the drivers off the diskette provided with your
monitor and click NEXT.
3
Confirm that Windows found the driver on the diskette and click NEXT again to install
the driver.
To manually install or update the driver, follow the directions below:
1
Click on START, SETTINGS, CONTROL PANEL, DISPLAY SETTINGS tab,
ADVANCED, MONITOR tab, CHANGE. This will start the "Add New Hardware
Wizard".
2
Follow the same directions as given in the steps in the section above.
®
Windows 95
To determine the version of Windows
Computer icon on the Windows desktop and select Properties. The version number can be
seen on the General section under "System:". Follow the directions given below according
to the version of your Windows
Version 4.00.950A
1
Click on START, SETTINGS, CONTROL PANEL, DISPLAY SETTINGS tab,
CHANGE DISPLAY TYPE, CHANGE, HAVE DISK.
2
Type the diskette drive letter in the box and click OK.
Version 4.00.950B
1
Click on START, SETTINGS, CONTROL PANEL, DISPLAY, ADVANCED
PROPERTIES, MONITOR tab, HAVE DISK.
2
Type the diskette letter in the box and click OK.
®
95 that your computer uses, right click on the My
®
95 operating system:
English 8