Samsung 73V User Manual page 13

4. Brightness button [ ]
2,4. Adjust buttons [
5. Enter button [ ]/
Auto button
See PowerSaver
For energy conservation, turn your monitor OFF when it is not needed, or when leaving it
unattended for long periods.
Rear
(The configuration at the back of the monitor may vary from product to product.)
1. Power port
2. D-sub 15-pin port
See Connecting Your Monitor
the monitor saves your adjustments.
When OSD is not on the screen, Push the button to adjust brightness.
Adjust items in the menu.
]
Activate a highlighted menu item. /
Use this button for auto adjustment direct access.
described in the manual for further information regarding power saving functions.
Connect the power cord for your monitor to the power port on the back of the
monitor.
Connect the signal cable to the 15-pin, D-sub connector on the back of your
monitor.
for further information regarding cable connections.