Bushnell Tour V4 Shift User Manual page 7

As with any laser device, it is not recommended to directly view the emissions for long periods of time with
magnified lenses. The maximum time the laser is transmitted (fired) is 5 seconds. To re-fire, press the POWER/
FIRE button down again.
LIQUID CRYSTAL DISPLAY (LCD) INDICATORS
Your TOUR V4 SHIFT 's LCD incorporates illuminated icons or symbols that indicate the selected unit of
measure, when the laser is actively firing, when a target has been acquired, and targeting modes. A summary
of these features follows:
MODE and UNIT OF MEASURE OPTIONS
The TOUR V4 SHIFT can be used to measure distances in yards or meters. The unit of measure indicators are
located in the lower right portion of the LCD. To select between yards and meters (starting with unit powered
off ), press and hold the POWER/FIRE button. After 7 seconds, the display will begin to cycle through the
options: Yards or Meters (for details on the Slope feature, see "About Tour V4 Shift with Slope Technology"). When
the units you want to use are displayed, release the POWER/FIRE button to select it. If you are changing from
yards to meters, a change in unit of measure will be indicated by the illumination of the M for meter indicator
while the Y for Yard indicator is turned off. If you are changing from meters to yards, the opposite will occur.
The TOUR V4 SHIFT will return to the last unit of measure setting used each time the unit is turned on.
ACTIVE LASER
Crosshairs surrounding the aiming circle indicate that the laser is being transmitted. Once a range has been
acquired, you can release the POWER/FIRE button. The crosshairs surrounding the circle will disappear once
the POWER/FIRE button has been released (i.e. the laser is no longer being transmitted).
7