Technical Specifications - HK Audio D.E.A.CON Manual

D.E.A.CON Manual 1.0
8 Technical specifications
D.E.A.CON Mid/High
Connectors:
Line in:
Input design:
Input impedance:
Sensitivity:
Max. input level:
Frequency response +/- 3dB:1)
Sensitivity 1W@1m:*)
Maximum SPL @1m: *)
Mid/high power amp:
Active protection circuitry:
MF speaker:
HF horn/driver:
Directivity:
Crossover frequency:
Speaker stand mounting collar:
Flying points:
Accessories:
Dimensions (WxHxD):
Weight:
D.E.A.CON Sub A
Connectors:
Subwoofer input:
Input design:
Input impedance:
Sensitivity:
Max. input level:
Frequency response +/- 3dB: 1)
Sensitivity 1W@1m: *)
Maximum SPL @1m: *)
Subwoofer amp:
Active protection circuitry:
Bass speaker:
Speaker stand mounting collar:
Casters:
Dimensions (WxHxD):
Weight:
1x XLR line in
1x XLR line through
1x XLR subwoofer output
XLR female (pin 1= ground; 2= +, 3= -)
Electronically symmetrical & floating
20 k Ohm
+10 dBu (turned up to the max)
+22 dBu
80 Hz–19 kHz fullrange mode
130 Hz–19 kHz satellite mode
104 dB
130 dB@10% THD
1x 600 W RMS, Class D
DDO™ controller multiband limiter, subsonic filter
12"
2"
60° x 40° CD horn
900 Hz, 12 dB/ octave
HK AUDIO ® DuoTilt™, 36 mm, 7.5°, 15°
4x M10 screw thread for optional flying mount
D.E.A.CON tilt-unit, 7.5°, 15°
40 cm x 66 cm x 50 cm / 15-3/4" x 26" x 19-3/4"
39.7 kg/ 87.3 lbs.
1x XLR subwoofer input, 1x XLR subwoofer through
1x Speakon ® parallel out
XLR female (pin 1= ground; 2= +, 3= -)
Electronically symmetrical & floating
20 k Ohm
+10 dBu (turned up to the max)
+22 dBu
44 Hz- 130 Hz
102 dB
134 dB
1x 1000 W RMS, Class D
DDO™ controller, multiband limiter, subsonic filter
18"
M20 thread plate
4x 80 mm casters on the reverse
52 cm x 72.5 cm x 71.5 cm / 20-1/2" x 28-1/2" x 28-1/8"
49.5 kg/ 109 lbs.