Samsung 460UTN-2 Quick Start Manual page 6

Introduction
• Connect a DVI or DVI-HDMI cable to
OUT (LOOPOUT)] on the product and
[DVI IN] or [HDMI IN] on another monitor.
• HDMI and network signals sent via the
[DVI OUT(LOOPOUT)] port are dis-
played on the second display which has
[DVI IN] port.
the
Note
• The Loopout function can be used to du-
plicate the screen of the primary display.
[DVI OUT] on the primary dis-
Connect
[DVI IN] or [HDMI] on another
play to
display.
• A maximum of 50 monitors can be con-
nected to DVI-Loopout (using a 2m-long
DVI cable). Up to Full HD resolution can
be supported. Compatible input sources
include DVI IN, HDMI IN 1, and HDMI IN
2 (MagicInfo).
RGB/COMPONENT IN (PC/COMPO-
NENT Connection Terminal (Input))
[RGB/COMPONENT IN]
• Connect the
port on the monitor to the RGB port on the
PC using the D-SUB cable.
[RGB/COMPONENT IN]
• Connect the
port on the monitor to the COMPONENT
port on the external device using the RGB
to COMPONENT cable.
[RGB/COMPONENT IN]
• Connect the
port on the monitor to the BNC port on the
PC using the RGB to BNC cable.
DVI IN (PC Video Connection Terminal)
[DVI IN] port on the monitor to
Connect the
the DVI port on the PC using the DVI cable.
RGB/DVI/DP/HDMI AUDIO IN (PC/DVI/
DP/HDMI Audio Connection Terminal (In-
put))
[RGB/DVI/DP/HDMI AUDIO
Connect the
IN] terminal of the monitor and the speaker
output terminal of your computer's sound
card using a stereo cable (sold separately).
DP IN
Receives a signal from the Display port.
[DVI