Niigata seiki VHS-30D Instruction Manual

DIGITAL HEIGHT GAUGE
Thank you for purchasing the Digital Height Gauge.
Please read this manual thoroughly before use for proper operation.
PART IDENTIFICATION
Fine Adjust Carriage
LCD Display
[ HOLD ] Button
[ ON/ZERO ] Button
[ ADD＋ ] Button
[ SUB− ] Button
Scribe Clamp Screw
Jaw
Measuring Surface
( w/ Carbide Tip )
Scribe
Scribe Clamp
APPLICATIONS and FEATURES
●
Smooth operation of slide carriage using crank wheel.
●
Ideal for measuring and marking work for molds, jigs, and tooling.
●
Accessory arm for mounting
●
Easy to ready digital display.
●
Origin can be set at any position.
●
Preset function.
●
HOLD function.
NOTES
・ Before using for the first time, please wipe off the corrosion
protectant with an oiled cloth.
・ This is a precision instrument, handle with care. Do not drop or
subject to excessive forces.
・ Please avoid damage to post. Do not scratch instrument, for
example by writing ID number.
・ Keep away from direct sunlight. Do not store instrument in
extreme temperatures.
・ When measuring using a dial indicator in place of scribe,
values for instrument error will vary from listed specifications.
Post
mm
HOLD
OFF
ON/ZERO
ADD
SUB
Battery Cover
8mm or 6mm dial indicator.
Fine Adjust Lock Screw
Clamp Lever
Crank Wheel
[ OFF ] Button
Base
Base Reference Surface
How to Use Each Button
[ ON/ZERO ] Button
1
●
When power is OFF, press once to turn ON.
●
When power is ON, press once to set display to 0.00mm .
[ OFF ] Button
2
Press to turn OFF power.
[ ADD＋ ] , [ SUB− ] Buttons
3
Allows operator to change display reading to any value.
Press [ ADD＋ ] to increase value by 0.01mm, or [ SUB− ] to
decrease by 0.01mm. Press and hold to quickly increase or
decrease value.
Any number can be preset into instrument for a position using
these buttons.
[ HOLD ] Button
4
Press to freeze ( hold ) the reading, and the LCD will display the
HOLD icon.
INSTRUCTION MANUAL
Model No. : VHS - 30D/VHS - 60D
【ACCESSORIES】
Dial Indicator Holder
Indicator Clamp Screw
6mm Mounting Hole
Dovetail
Indicator Mounting Arm
8mm Mounting Hole
Driver for Battery Cover
Dial Indicator
Model: WTI-8038S
SR44 Silver Oxide Battery ( For test )
SR44
<combined>