Figure 2-1
Desktop Installation
Rack Installation
■
To install the device in an EIA standard-sized, 19-inch rack, follow the instructions described below:
1. Check the grounding and stability of the rack.
2. Secure the supplied rack-mounting brackets to each side of the device with supplied screws, as
illustrated in the following figure.
Figure 2-2
Bracket Installation
3. After the brackets are attached to the device, use suitable screws (not provided) to secure the
brackets to the rack, as illustrated in the following figure.
Figure 2-3
Rack Installation
Caution:
Please set 5 to 10cm gaps around the device for air circulation.
■
Please avoid any heavy thing placed on the device.
■
Please place the device with its bottom facing downwards.
■
Please mount devices in sequence from the bottom to top of the rack and ensure a certain
■
clearance between devices for the purpose of heat dissipation.
JetStream Smart Switch
Feet
Bottom of the Device
Notch
Rack-mounting Bracket
Screw
Rack
Installation
11