R&TTE directive 1999/5/EC. The Declaration of Conformity can be found in the CloudGate documentation. (www.cloudgateuniverse.com) To begin using the CloudGate, follow the steps in this guide: 1. Register your CloudGate on the Option provisioning server Go to the Option Provisioning server www.cloudgateuniverse.com...
Page 2
Replace the top cover plate and its four Torx T10 screws. 5. Power up the CloudGate by plugging in the appropriate power supply cable (9- 33VDC) into the connector on the back of the device.
Need help?
Do you have a question about the CloudGate and is the answer not in the manual?
Questions and answers