Selecting The Sound Mode (Depending On The Model) - Samsung DLP TV SP42L6HX Owner's Instructions Manual

Selecting the Sound Mode
English - 38
(depending on the model)
The "DUAL I-II" button displays/controls the processing and output
of the audio signal. When power is switched on, the mode is
automatically preset to either "Dual I " or "Stereo", depending on
the current transmission.
Type of broadcast
Regular broadcast
(Standard audio)
Regular +
NICAM Mono
NICAM
Stereo
NICAM Stereo
NICAM Dual 1/2
Regular broadcast
(Standard audio)
A2
Bilingual or Dual I/II
Stereo
Stereo
➢
◆ If the receiving conditions deteriorate, listening will be
easier if the mode is set to the Mono.
◆ If the stereo signal is weak and an automatic switching
occurs, then switch to the Mono.
◆ When receiving a mono sound in the AV mode, connect
to the "AUDIO-L" input connector on the side of the
television. If the mono sound comes out only from left
speaker, press the DUAL I-II button.
On-screen indication
Mono (Normal use)
NICAM Mono ↔ Mono
NICAM Stereo ↔ Mono
(Forced mono)
NICAM Dual 1 →
NICAM Dual 2 →
Mono
Mono
Dual I ↔ Dual II
Stereo ↔ Mono
(Forced mono)