Table of Contents
Advertisement
SECTION 3 |
NOTE:
For sizing of wiring and fuses, refer to the following:
(a) DC side wiring: Table 3.1
(b) AC side wiring: Table 3.2 for AC input and Table 4.3 for AC output.
L.
Line Terminal
L-B.
Line Bus Bar
N.
Neutral Terminal
N-G.
Neutral to Ground Bond
N-B.
Neutral Bus Bar
G-B.
Grounding Bus Bar
SBJ.
System Bounding Jumper
J1, 2, 4, 7, 9
RY2.
Relay for Neutral to Ground Bond Switching (Section 4.4.2)
BCTS. Battery Charger Temperature Sensor EVO-BCTS [Fig 2.5(a)]
1.
Battery Positive Input Connector (1, Figs 2.1 / 3.8)
2.
Battery Negative Input Connector (2, Figs 2.1 / 3.8)
3.
Positive Input Connector for External Charge Controller (3, Figs 2.1 / 3.8)
4.
Negative Input Connector for External Charge Controller (4, Figs 2.1 / 3.8)
5.
DC Side Grounding Terminal on EVO
6.
RJ-45 Jack for Temperature Sensor (6, Fig 2.1)
GE.
Grounding Electrode. Also called "Ground Rod"
20.
AC Input / Output Terminal Block
21.
INPUT L
22.
INPUT N
23.
INPUT GND
24.
OUTPUT L
25.
OUTPUT N
26.
OUTPUT GND
27.
Quick Disconnect to disconnect Neutral to Ground bond
Circuit breaker
Fuse
A
120 VAC Leg, Phase A
B
120 VAC Leg, Phase B (180° out of phase with Phase A Leg)
WARNING!
In case a Generator is used to feed AC input, please ensure that the Neutral conduc-
tor of the Generator is bonded to the chassis / frame of the Generator. Please refer to
Section 3.14.2 for details.
MISE EN GARDE!
En cas d'un générateur est utilisé pour envoyer de l'entrée CA, veuillez vous assurer que le conducteur neutre de la
génératrice est collé sur le châssis / cadre de la génératrice. Veuillez vous reporter à la section 3.14.2 pour plus de détails
70 | SAMLEX AMERICA INC.
Installation
LEGEND for Fig 3.15
Male Tab Terminals on internal Circuit Board
(5, Fig 2.1)
TM
Refer to AC Input / Output
Connections for EVO-1212F-HW
/ 1224F-HW at Fig 3.9.2(a)
Advertisement
Table of Contents
