Samsung Tint SCH-R420 Series User Manual page 25

Say "Yes" to confirm the name or "No" to hear the next
4.
name, or use the keypad to select the correct name from
the list. (For more information, refer to "Choice Lists" on
page 75.)
• Press the Repeat soft key to say the name again.
• Press the Settings soft key, then press the Exit soft key to exit
VoiceSignal without dialing.
If the recognized name has multiple numbers stored for it
(that is, Home, Work, Mobile, and so on), Voice Dial
displays the possible choices and prompts you with "Which
number?"
Say one of the following number types:
5.
• "Home"
• "Work"
• "Mobile"
• "Pager"
Voice Dial dials the specified number.
Dialing a Number
To dial a number using Voice Dial, do the following:
In standby mode, press and hold
1.
.
"Say a Command" appears in the display and is
pronounced through the speaker.
Say "Call".
2.
VoiceSignal prompts you to "Say the name or number."
Speak clearly and say the telephone number of the person
3.
you want to call.
Example: Say "7 8 1 9 7 0 5 2 0 0".
If it recognizes the number, Voice Dial repeats it and dials
the number. If Voice Dial is not sure it has recognized the
number, it displays a choice list of up to three numbers and
prompts you with "Did you say?" followed by the first
number on the list.
Say "Yes" to confirm the number or "No" to hear the next
4.
one, or use the keypad to select the correct number from
the list. (For more information, refer to "Choice Lists" on
page 75.)
• Press the Repeat soft key to say the name again.
• Press the Settings soft key, then press the Exit soft key to exit
VoiceSignal without dialing.
Call Functions 22