Voice Dialing - Samsung Tint SCH-R420 Series User Manual

Press the number key representing the second digit of the
2.
desired Contact's speed dial number.
Press and hold the number key representing the third digit
3.
of the desired Contact's speed dial number.
Example: To speed dial the Contacts entry assigned to speed dial 325, press
, press , then press and hold

Voice Dialing

The voice recognition capabilities of your My Shot are exceptional
due to advanced, speaker-independent technology. This means
you do not need to "train" your phone to understand your voice.
You can use your voice in a natural manner to dial numbers.
Note: End Calls Before relaunching the VoiceSignal voice recognition
software — When you use Voice Dialing to make a call, you must end
that call before you can use other Voice Commands. (For more
information, refer to "Voice SVC" on page 74.)
Use the Call command to dial any number stored in your Contacts
list by saying the name of the contact (Name Dialing). You can
also use Call to dial any telephone number, even numbers not
stored in your contact list, by speaking the individual digits in the
number (Digit Dialing).
Voice Dialing Tips:
Wait for the beep before speaking.
•
21
.
Speak clearly at a normal volume, as if you were talking to someone
•
on the phone.
When saying a name, say the first name then the last name.
•
Dialing a Name
To dial a name, do the following:
In standby mode, press and hold
1.
"Say a Command" appears in the display and is
pronounced through the earpiece.
2. Say, "Call".
You are prompted to "Say the name or number".
Speak clearly and say the name of a person in your
3.
Contacts list, first name followed by last name.
If the name is recognized, Voice Dial repeats the name and
dials the number.
If Voice Dial is not sure which name you said, it displays a
choice list of up to three names and prompts you with "Did
you say?" followed by the first name on the list.
.