Table of Contents
Advertisement
2.3.3 Dip Switch
Pin1
OFF OFF Normal
ON
OFF ON
z Touch Screen Calibrate mode: In this mode when you power on the
FPC-8057
the screen will display a "+" sign at the center of the
,
screen. Use a stylus or finger to push the center of the "+" until it
moves. The "+" moves to upper-left, lower-left, lower-right and upper-
right corners. When all five "+" are done the "+" will disappear. The
Touch Screen parameter will store at Flash Rom.
Installation Instructions
FPC-8057 User's Manual
Pin2 Mode
OFF Touch Screen Calibrate mode
Boot Loader mode
P Pin3, 4 unused
17
Advertisement
Table of Contents
