Pioneer MVH-S501BS Owner's Manual page 27

Listening to a channel
1
Press and hold DISP, then select [CHANNEL].
You can also select the operation mode by the SiriusXM settings (page 34).
2
Press SRC/OFF to select [SIRIUSXM].
3
Press BAND/
4
Press /
Pressing and holding either button will rapidly browse through the channels.
Press and hold either button then release to tune automatically. Scanning stops
when the unit receives a channel. To cancel seek tuning, press
Basic operations
1
Press and hold DISP to select the operation mode [CHANNEL] or [REPLAY].
NOTE
You can exit the replay mode by pressing and holding BAND/
Purpose
Select a channel
Skip backward/forward
Fast forward or reverse
NOTE
You can also make various adjustments in the SiriusXM settings (page 34).
Category scan
The live broadcast for each channel in the current category plays for six seconds at a
time. Follow the instructions below.
To search for a channel from a list
1
Press during playback.
2
Turn the M.C. dial to select a category.
3
Select one of the operations below.
Category scan: Press and hold the M.C. dial to switch to category scan.
to select a band from [SXM1], [SXM2] or [SXM3].
to select a channel.
- 27 - - 27 -
.
Operation
1 Set the operation mode to [CHANNEL].
2 Press
or
Pressing and holding either button will
rapidly browse through the channels.
1 Set the operation mode to [REPLAY].
2 Press
or
1 Set the operation mode to [REPLAY].
2 Press and hold
/ .
.
.
or .