Usb/Iphone/Aux - Pioneer MVH-S501BS Owner's Manual

2
Turn the M.C. dial to select [FUNCTION], then press to confirm.
3
Turn the M.C. dial to select [BSM], then press to confirm.
To seek a station manually
1
After selecting the band, press
Press and hold
when the unit receives a station. To cancel seek tuning, press
NOTE
[SEEK] needs to be set to [MAN] in the FUNCTION settings (page 33).
To store stations manually
1
While receiving the station you want to store, press and hold one of the number
buttons (1/ to 6/
NOTE
You can select a preset channel by pressing
press and hold the M.C. dial to store a station.

USB/iPhone/AUX

Playing back
Disconnect headphones from the device before connecting it to the unit.
USB devices (including Android™)/iPhone
1
Open the USB port cover.
2
Plug in the USB device/iPhone using an appropriate cable.
NOTE
To automatically switch to [USB] source when a USB device/iPhone is connected to the unit, set [USB
AUTO] to [ON] in the SYSTEM settings (page 39).
CAUTION
Use an optional Pioneer USB cable (CD-U50E) to connect the USB device as any device connected
directly to the unit will protrude out from the unit, which could be dangerous.
Before removing the device, stop playback.
/
/ then release to seek an available station. Scanning stops
) until it stops flashing.
and turning the M.C. dial. After selecting a channel,
- 13 - - 13 -
to select a station.
/ .