Using Voice Dial - Samsung SPH-M300 User Manual

Using Voice Dial

Voice Dial allows you to dial any valid seven- or ten-digit
North American phone number or Contacts entry by speaking
the number or name naturally, without pausing.
Tips for using Voice Dial:
Voice Dial works best in quieter environments.
When saying a number (Digit Dialing), speak at a normal
speed and say each digit clearly. There is no need to pause
between digits.
The phone recognizes the digits one, two, three, four, five,
six, seven, eight, nine, and zero or oh. The phone does not
recognize numbers such as "one eight hundred" for
"1-800." Instead, say "one-eight-zero-zero."
The phone recognizes only valid seven- or ten-digit North
American phone numbers.
If your phone does not usually recognize you correctly
when you are using Digit Dial, try adapting Digit Dial to
your voice, which can significantly improve accuracy for
some speakers. (See "Adapting Digit Dial" on page 130 for
details.)
To place a call using Voice Dial:
1.
Activate voice recognition by pressing and holding
(The phone prompts you for a command.)
2.
Say "Voice Dial." (The phone prompts you to say the
name or number clearly.)
3.
Say a valid contact entry or seven- or ten-digit North
American phone number naturally and clearly, or say a
name from your Contacts.
4.
If the phone asks you, "Did you say," followed by the
correct name or number, say "Yes."
Section 2H: Using Your Phone's Voice Services
.
129