Page 1
Instruction and Service Manual This manual covers the following loudspeaker models: Model 13310-311, 16-ohm, 25 watts, UL Class I Division 1 Model 13310-312, 8-ohm, 25 watts, UL Class I Division 1 Model 13310-313, 70 V line, 25 watts, UL Class I Division 1 GAI-TRONICS 3030 KUTZTOWN RD.
Warranty Equipment. GAI-Tronics warrants for a period of one (1) year from the date of shipment, that any GAI-Tronics equipment supplied hereunder shall be free of defects in material and workmanship, shall comply with the then-current product specifications and product literature, and if applicable, shall be fit for the purpose specified in the agreed-upon quotation or proposal document.
Page 3
NEC / CEC and any local regulations and should only be carried out by a competent electrical engineer who has the necessary training. __________________________________________________________________________________________________________________ GAI-Tronics 3030 Kutztown Rd. Reading PA 19605 USA customerservice@gai-tronics.com Tel: 800-492-1212 Document No. 42004-502A 09-29-15 www.gai-tronics.com...
Page 4
Additional entries which are not used must the PCB assembly located in the explosionproof enclosure. always be fitted with suitably certified blanking elements. __________________________________________________________________________________________________________________ GAI-Tronics 3030 Kutztown Rd. Reading PA 19605 USA customerservice@gai-tronics.com Tel: 800-492-1212 Document No. 42004-502A 09-29-15 www.gai-tronics.com...
Page 5
M5 spring washer and M5 nut. The earth conductor should be at least equal in size and __________________________________________________________________________________________________________________ GAI-Tronics 3030 Kutztown Rd. Reading PA 19605 USA customerservice@gai-tronics.com Tel: 800-492-1212 Document No. 42004-502A 09-29-15 www.gai-tronics.com...
Page 6
Warranty Equipment. GAI-Tronics warrants for a period of one (1) year from the date of shipment, that any GAI-Tronics equipment supplied hereunder shall be free of defects in material and workmanship, shall comply with the then-current product specifications and product literature, and if applicable, shall be fit for the purpose specified in the agreed-upon quotation or proposal document.