Faq; Why There Is No Picture After Upgrading Software /Changing Project Id? - TCL 32E5300 Service Manual

3. FAQ

1) Why there is no picture after upgrading software or changing project ID?
It may be caused by fault of project ID. You can try below method to fix
the problem.
a. If the resolution of the panel of your set is 1366×768(HD panel), you can press
Menu, and 4976 of remote control in series after turning on.
b. If the resolution of the panel of your set is 1920×1080(FHD panel), you
can press Menu,
c. If you can see the picture at this time, please recheck the project ID again. If
the project ID is still wrong, correct it reference to above description.
MS82S-AP/LA Chassis Software Upgrade Guidance
and 4973 in series after turning on.
PRELIMINARY INFORMATION ----- SUBJECT TO CHANGE
20