Adc Calibration And White Balance Adjustment; White Balance Adjustment (Automatically); Chip List Of Software Programming Before Smt - TCL 32E5300 Service Manual

4.5 ADC Calibration and White Balance Adjustment (automatic)
The process of adjusting ADC and White Balance automatically is out of the range
of this file. Please refer to the relevant technical file of HuiZhou factory of TCL

5. Chip list of software programming before SMT

Following chips must be programmed before SMT by ALL-11 or other tools.
Position Chip type
1 U502 Flash
2 U503 E2PROM
Note:
1) The software for U502 and U503 can be program using ISP tool.
2) Every set has its unique HDCP key which is purchased from suppliers or HDCP
certification authority. Please check HDCP function in the process of production.
3) Once in a while, the software of main board may be upgraded. Please pay attention to
use the latest software before production.
MS82S-AP/LA Chassis Software Upgrade Guidance
Chip name
EN25Q3
M24C64
PRELIMINARY INFORMATION ----- SUBJECT TO CHANGE
Part number
13-EN25Q3-2AB
13-M24C64-W6B
Software Decal
description
main software SO-8
HDCP KEY SO-8
16