LEO ACm60 Instruction Manual page 5

Acquaer Ltd. H-4900, Fehérgyarmat, Szatmári út 11.
Keep the pump in ventilation.
n case ambient temperature is lower than 4℃ or the pump is not
I
used for a long time, empty liquid the pipeline system to avoid ice
cracking of the pump chamber.
Do not operate the pump for a long time without water in it.
The pumped liquid maybe hot and under high pressure, before
moving and demounting the bump, valves in both sides of the
bump should be turned off first and then empty liquids in the
pump and pipelines so as not to be scalded.
Do not transfer any inflammable, explosive or gasified liquids that
beyond the stipulation.
Ensure the pump will not be accidently turned on while installing
and maintaining; if not used for a long time, cut off the power first
and then turn off valves in inlet and outlet of the pump.
Power supply should be in accordance with the voltage stated in
the nameplate. If not used for a long time, put the pump in dry,
ventilated and cool place under room temperature.