Connecting To The Pipe Network; Disassembly Of The Thermal Insulation (Cover) - Danfoss ThermoDual-CM Quick Manual

Quick Guide ThermoDual®-CM

Connecting to the pipe network:

Once the system is correctly aligned at the installation site,
it can be connected to the pipe network.

Disassembly of the thermal insulation (cover):

The thermal insulation consists of 3 hard foam parts.
The back part with the left and top cover is firmly
connected to the stand frame:
In addition, pumps and valves are provided
with flexible covers.
First remove the flexible pump covers by carefully pulling
them out of the recesses of the insulating cover.
These are flexible and can be easily dismantled
by pressing them together.
DHS-SMTL / PL VQ.MP.A1.02 © Danfoss 09/2018 3