Mr. Nixie IV-12 VFD-Clock Jenny Owner's Manual

The RGB-Controller
A built in RGB controller, together with the RGB lighting
through the tube sockets makes a seemingly endless play
of millions of color combinations.
Briefly pushing button LED
will stop and start the running sequence.
Press and hold (about 1.5 s) button LED
turns the RGB controller off and on.
2 x briefly pushing button LED
will step through all available sequences as shown below.
Included RGB-sequences
Fade fast through full colour
spectrum with high brightness
Marker 2 x red flashing
Breathing colours with low brightness
Breathing colours
with high brightness
Marker 2 x white flashing
Fade pink to purple
Briefly pushing twice button „LED"
with low brightness
(like a „doubleclick" with a computer mouse)
will clockwise step through all sequences.
Fade pink to purple
with high brightness
Marker 2 x purple flashing
Fade cyan to green with low brightness
Fade cyan to green with high brightness
Marker 2 x blue flashing
Fade fast through full colour spectrum with low brightness
Marker 2 x yellow flashing
Fade slow through full colour
spectrum with high brightness
Fade slow through full colour
spectrum with low brightness
Marker 2 x green flashing
Pastell colours fast
with high brightness
Pastell colours fast
with low brightness
Marker 2 x cyan flashing
Pastell colours slow with high brightness
Pastell colours slow with low brightness
IV-12 VFD-Clock
Jenny
Owners manual
Congratulations on your purchase
of this exceptional piece of jewelry.
Please take some time to read this manual
carefully.
Doing so will ensure your happiness with your
IV-12 VFD clock „Jenny" for many years.