Samsung SGH T319 User Manual page 88

•
Character support: allows you to select a character encoding
type, either GSM-alphabet, Uni-code, or Automatic. If you
select Automatic, the phone automatically changes the
encoding type from GSM-alphabet to Uni-code when you enter
a Uni-code character.
When you select Uni-code, the maximum number of
characters that can be in a message is reduced to
approximately half. If your recipient's phone does not
support Uni-code characters, he/she may not be able to
read your message correctly.
Note: If your phone doesn't have the Character support menu, the phone
provides the Automatic character encoding by default.
Picture Messages
The following options are used to set Send and Receive
settings for Picture messages.
Send Settings
•
Priority: you can select the priority level of your messages.
•
Validity period: set the length of time your messages are
stored in the message center while the network attempts to
deliver them.
•
Delivery after: you can set a delay time before the phone sends
your messages.
•
Delivery report: when this option is enabled, the network
informs you whether or not your message has been delivered.
•
Read reply: when this option is enabled, your phone sends a
request for a reply along with your message to the recipient.
Receive Settings
•
Msg. reception: you can set your phone to automatically
receive incoming messages.
84