Advertisement
Now you have to install the cross-ribs of
bow and stern.
Slide the ribs in the same way onto the
clip on the keel as you did it before.
Then push the ends into the fittings
mounted on each side of the hull.
Proceed likewise on the other end.
Now inflate the high pressure sponsons.
Best is first to inflate the lower sponson
on one side to around 50%, then on the
other side equally. Then change again
and fully inflate them in turns.
Proceed likewise with the upper
sponsons.
Then insert the adapter into the valve
and with a half turn screw it to it.
12
Advertisement
