Table of Contents
Advertisement
Homepage URL: set the address of your startup
homepage. When the default homepage displays, you can
delete it using the
key and enter your own choice.
Security: set the data transmission mode. Choose
Secure to protect your data against unauthorized access;
otherwise, choose Non-Secure.
IP Address: enter the WAP gateway address required to
connect to the Internet.
Bearer: select the bearer to be used for each type of
network address accessed: GPRS or Data. The remaining
options depend on the Bearer setting.
When the bearer is set to Data
Login Name: enter the PPP server login ID.
Password: enter the PPP server password.
Dial-up Number: enter the PPP server phone number.
Data Call Type: select a data call type from Analogue or
ISDN
.
When the bearer is set to GPRS
User Name: enter the User ID required to connect to the
GPRS network.
Password: enter the password required to connect to the
GPRS network.
APN: enter the access point name used for the address of
the GPRS network gateway.
Note:
The WAP Browser settings may vary, depending on the service provider.
Contact your service provider for further information.
Funbox
134
Advertisement
Table of Contents
