Lennox ComfortSense 7500 Series User Manual page 12

Setting Selection
general - provides
information about the
thermostat and settings for
screen lock, date & time
and language.
display - Allows the user
to control some information
that is displayed on the
home screen.
Table 3. User Settings (General)
Function Description
Pre-Occupancy: Options are 0 through 3 hours with a default of 0 hour.
This selection opens the dampers early, either 1, 2 or 3 hours.
occupancy
Post-Occupancy: Options are 0 through 3 hours with a default of 0
your. This selection keeps the dampers open, either 1, 2 or 3 hours.
Outdoor
temperature
display or
discharged
air display
(what is
displayed Options are off or sensor.
here
depends
on sensor
used and
configured
by installer.
Options are enable and disable. Default is enabled. When enabled
only the time and inside temperature is displayed on the screen.
Touching the screen will restore all other details.
screen saver
The back light setting is also on the same screen. Options are
continuous on or energy save. Default is continuous on.
screen A horizontal adjustment bar is provided to move from minimum to
brightness maximum brightness.
temperature
°F for Fahrenheit or C° for Celsius.
scale
clean screen This will disable the touchscreen for 30 seconds.
12