Table of Contents
Advertisement
Receiving a PTT Call
For the best experience, your ringer should be set to the highest
volume.
If your status is Available you hear a PTT Call tone and the
1.
caller's voice.
If your status is Vibrate All your phone vibrates and you
2.
must press Accept or Reject soft key.
• If you select Accept the call plays the callers voice over the
earpiece.
• If you select Reject the call terminates.
Note: Rejected PTT calls are not forwarded to voicemail.
• If set to Silent the notification tone does not sound.
Convert a PTT Call to a Cellular Call
To convert a PTT call to a cellular call, use the following steps.
Note: Convert to cellular can only be executed by the originator of a call.
Make a PTT call. (For more information, refer to "Making a
1.
PTT Call" on page 55.)
Press the Options soft key. Convert to Cellular highlights.
2.
56
Press the Select soft key or the
3.
cellular tone announces to the originator and other call
participants that the call was converted to a cellular call.
Each call participant continues to hear the call but must
4.
press the PTT key to also convert to cellular.
PTT Settings
In Idle mode, press Menu
1.
key or the
key.
Select PTT Settings and press the Select soft key or the
2.
key. Choose from the following options:
• My Availability : this option allows you to change your Availability
status. Use the Up or Down Navigation key, to highlight Do Not
Disturb or Available and press the Select soft key or the
• Contact Alerts : this option allows you to be alerted when the
availability status of a contact changes from Unavailable or Do Not
Disturb to Available or Silent/Vibrate.
Press the Select soft key or the
from PTT Contacts displays. Press the
individuals for whom you want to receive alerts.
Note: A check mark displays beside each selected contact.
key. The convert to
➔
PTT and press the Select soft
key, a list of individuals
key, to select those
key.
Advertisement
Table of Contents
