Subscribe to Our Youtube Channel
Related Manuals for ECOWITT WH0280
Summary of Contents for ECOWITT WH0280
- Page 1 Instruction Manual Wireless Indoor / Outdoor Thermometer with Indoor Humidity Model: WH0280...
-
Page 2: Table Of Contents
Instruction Manual Contents 1. Introduction ............3 2. Get Started ............3 2.1 Parts List ..........3 2.2 Recommend Tools ........4 2.3 Thermometer Sensor Set Up ....4 2.4 Display Console Set Up ......5 2.4.1 Display Console Layout ..... 7 2.4.2 Sensor Operation Verification ... - Page 3 Instruction Manual 7.Specifications ............14 7.1 Wireless Specifications ......14 7.2 Measurement Specifications ....14 7.3 Power Consumption ......14 8. FCC Statement ..........15 9.Warranty Information ......... 17...
-
Page 4: Introduction
Instruction Manual 1. Introduction Thanks for your purchasing of the WH0280 Wireless Indoor/Outdoor Thermometer with Indoor Humidity. To ensure the best product performance, please read this manual and retain it for future reference. 2. Get Started Note: Power up sequence must be performed in... -
Page 5: Recommend Tools
Instruction Manual 2.2 Recommend Tools Hammer for hanging remote thermometer transmitter. 2.3 Thermometer Sensor Set Up 1. Remove the battery door on the back of the sensor by sliding the compartment door down, as shown in Figure 1. 2. Set RF sensor channel. Figure 1... -
Page 6: Display Console Set Up
Instruction Manual Wireless transmitter LED 1, 2, 3 RF Channels AA Battery Battery Compartment Cover 3. Insert one AA battery. 4. After inserting the battery, the remote sensor LED indicator will light for 4 seconds, and then flash once per 60 seconds thereafter. Each time it flashes, the sensor is transmitting data. - Page 7 Instruction Manual Figure 2 1. Integrated Hang Hole Hang Hole 2. Stand Mount 3. CH/+ Button 4. Mode Button 5. Battery Compartment 6. Battery Compartment Cover All of the LCD segments will light up for a few seconds to verify all segments are operating properly.
-
Page 8: Display Console Layout
Instruction Manual desk stand and place the console in the upright position. The console will instantly display indoor temperature humidity. remote temperature will update on the display within a few minutes. While in the search mode, the reception search icon flash. -
Page 9: Sensor Operation Verification
Instruction Manual 1. Alarm Clock Icon 2. Current Indoor Temperature 3. RF Channels 4. Time 5. Current Indoor Humidity 6. Outdoor Reception Icon 7. Current Outdoor Temperature 2.4.2 Sensor Operation Verification Verify the indoor and outdoor temperature match closely with the console and sensor array in the same location (about 2 to 3m apart). -
Page 10: Mounting With Zip Tie
Instruction Manual 3.1 Mounting with Zip Tie Mounting the sensor with a zip tie will result in better accuracy when mounting outside, since it is not touching another object. Other objects will store and radiate heat (or cold). Figure 4 3.2 Mounting with Nail or Screw To mount the sensor with a nail or screw, the cap must be less than or equal to 5.0 mm in... -
Page 11: Console Operation
Instruction Manual Figure 5 4. Console Operation Note: The console has two buttons for easy operation: 【 CH/+ 】 button (on the left), and 【MODE】button (on the right). If no operation for 30s, display will return back to normal mode. 4.1 Setting for 12/24hr Switch, Time and °C/°F Switch Long press【MODE】button 2s, step into setting... -
Page 12: Setting For Alarm Clock
Instruction Manual 1-12 or 0-23. c. Short press【MODE】,step into Minute setting, Short press【 CH/+ 】to adjust the number from 0-59. d. Short press【MODE】, step into temperature unit setting, short press 【CH/+】to select°C/°F display. e. Short press 【 MODE 】 , to complete setting mode and back to normal mode. -
Page 13: Setting For Min/Max Record
Instruction Manual 4.3 Setting for Min/Max Record 4.3.1 Min value mode a. Short press【MODE】for twice, step into Min value display mode. b. Short press【CH/+】to select other available outdoor sensor Min value (if no extra outdoor sensor available, it will display “--.-“ instead). c. -
Page 14: Setting For Rf Channels
Instruction Manual 4.4 Setting for RF Channels During normal display mode, press 【CH/+】to select outdoor sensor display in the following sequence: CH1 – CH2 – CH3 – 5.Sensor Resynchronization when the remote sensor lost reception or extra sensors to be added, press both the 【CH/+】 and 【MODE】... -
Page 15: Specifications
Instruction Manual 7.Specifications 7.1 Wireless Specifications Line of sight wireless transmission (in open air): 300feet(100meters) Frequency: 433 MHz Update Rate: 60 seconds 7.2 Measurement Specifications The following table provides specifications for the measured parameters. Measurement Range Accuracy Resolution Indoor ±... -
Page 16: Fcc Statement
Instruction Manual Lithium batteries (not included) 8. FCC Statement Statement according to FCC part 15.19: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: 1. This device cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. - Page 17 Instruction Manual interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
-
Page 18: Warranty Information
Instruction Manual installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. - Page 19 Instruction Manual materials and workmanship. This limited warranty begins on the original date of purchase, is valid only on products purchased and only to the original purchaser of this product. To receive warranty service, the purchaser must contact us for problem determination and service procedures.
Need help?
Do you have a question about the WH0280 and is the answer not in the manual?
Questions and answers