Table of Contents
Advertisement
Data
Use the Data sub menu to set your phone to detect data
connections automatically and to set the speed at which
data is transmitted (baud rate).
1. In standby mode, press the left soft key ( ), then press
(for Setup),
Data
The following options appear in the display:
.
Auto Detect—Set data auto detect capabilities. Options are:
data off, data for next call, and data until powered off.
Baud Rate—Set the baud rate for data connections. Options
are: Auto, 19200, 38400, 57600, 115200, and 230400.
2. Use the navigation keys to highlight Auto Detect or
Baud Rate, then press
options appear in the display.
3. Use the navigation keys to highlight the desired Auto
Detect or Baud Rate setting, then press
Call Answer
You can select a specific answer mode when you
receive an incoming call. Your phone can be preset to
answer when you do any of the following:
1. In standby mode, press the Menu (left) soft key ( ),
then press
for Call Answer
menus appear in the display:
Send Key—Press
Folder Open—Open the folder to answer an incoming call.
Any Key—Press any key except
call.
186
(for Call Options), and
. The selected sub menu
(for Setup),
(for Call Options), and
The following Call Answer sub
.
to answer an incoming call.
for
.
to answer an incoming
Advertisement
Table of Contents
