Table of Contents
Advertisement
Flash
Flash enables you to take pictures in low light. The
flash is located on the outside of the folder, beside the
camera.
1. In standby mode, press the Menu (left) soft key ( ),
then press
for Flash. Off and On appear in the display.
2. Use the navigation keys to highlight Off or On, then press
the
Note: When the flash is set to On, the flash icon (
display in camera mode.
Change Picture Resolution
Change the size (in bytes) of your pictures using the
Resolution setting. Options are High, Medium, and
Low.
Note: With Fun Frames enabled, the camera only takes pictures in Low
Resolution mode (regardless of resolution setting).
Tip: Change a photo's resolution for the current camera session (only)
using the Up and Down navigation keys while in camera mode.
1. In standby mode, press the Menu (left) soft key ( ),
then press
for Resolution. The following options appear in the
display:
High (VGA 640 X 480)
Medium (QVGA 320 X 240)
Low (QQVGA 160 X 120)
146
(for Camera),
key. You're returned to the Settings menu.
(for Camera),
(for Settings), and
) appears in the
(for Settings), and
Advertisement
Table of Contents
