Table of Contents
Advertisement
Set NAM
1. In standby mode, press the Menu (left) soft key ( ),
then press
Set NAM. The following Set NAM options appear in
for
the display:
•
NAM 1—Your service contract has one phone line.
•
NAM 2—Your service contract has two phone lines.
2. Use the navigation keys and to highlight NAM 1 or NAM
2, the press
The idle screen appears in the display.
Roam Option
The Roam Option feature enables you to automatically
or manually select the network used when roaming
outside of your home area.
1. In standby mode, press the Menu (left) soft key ( ),
then press
for
appear in the display:
•
Home only—Roaming is off. If your home system is not
available then your call will not be connected, and the no
service icon (
areas, an operator may come on-line and ask you how you
would prefer to pay for the call.
•
Automatic-A—Roaming is on. This setting seeks an analog
or digital service automatically. It searches for an alternative
system.
•
Automatic-B—Roaming is on. This is your default setting. It
will always try your calls using the Preferred Roaming List (PRL)
loaded into your phone. If a preferred service is not found, then
this option will attempt to acquire any digital or analog service.
(for Setup),
to save your selection.
(for Setup),
Roam Option. The following roaming options
) appears in the display. In some service
Section 13: Changing Your Settings
Network Settings
(for Network
and
),
(for Network
and
),
177
Advertisement
Table of Contents
