90 days and overall balance of parts for six months. This DC electrically driven rotary motor is designed to be used with the Power Hand 3 Controller (#510-3300). For use with Gesswein Power Hand 2X controllers, the PH3 adaptor (#510-3304) is necessary to connect the 15,000RPM Rotary Handpiece 5 prong motor plug to the 3 prong controller receptacle.
Page 2
3. General Description of Use Included Accessories Tool Changing A. One " (2.35mm) Collet (reorder #501-0100) ⁄ The Gesswein Power Hand 3 Rotary B. One Handpiece uses a quick-tool-release " (3.2mm) Collet (reorder #501-0105) ⁄ mechanism that allows for rapid tool changes.
Page 3
4. Operating Procedure with Power Hand 3 Controller With your rotary handpiece fitted with a selected tool, connect the Gesswein Power Hand 3 Controller to an electrical supply and the handpiece to the If the collet cannot be loosened by hand using A motor or B motor output socket.
Page 4
6. Replacement of carbon brushes 5. Precautions Gesswein Power Hand 3 motors use a spring tension-type carbon brush Before operating your handpiece, be sure that the Collet Release Ring is assembly. The approximate life of these brushes is 800-1,000 hours. Use the in the “S”...
Page 5
RPM and make sure nothing is abnormal with behavior. 10. Lubrication - Lubrication of your Gesswein Power Hand 3 Rotary Handpiece IS NOT NECESSARY, and you should NOT let oil or other fluids enter the Head Assembly (see Precautions).
Page 6
PH3 15X Handpiece Parts List When ordering spare parts, always specify part# (or item# if applicable) and description. Part# Item# Description JA-236 8960050 Top Cover KS-184 8960051 Teflon Spacer ON10-401 8960052 O-Type Rubber Ring AR16-114A 8960053 Dust Ring KW-180 8960054...
Page 7
PH3 15X Motor Parts List When ordering spare parts, always specify part# (or item# if applicable) and description. Part# Item# Description KA20-105-BB UM21A-310 896-0326 Motor Case YSF21-103 896-0002 Countersunk Head Screw ON10-301 896-0003 O-Type Rubber Ring KS-118 896-0004 Metal Spacer...
Page 8
Power Hand 3 controllers and handpieces combine to create the most versatile finishing system in the industry, offering rotary, profiling and belt sanding action. Power Hand 3 component selection: • PH3 controller • Six motors (three high torque, two standard, and one high speed) •...
Need help?
Do you have a question about the PH3 15X and is the answer not in the manual?
Questions and answers