Remote Controller Lcd Screen Menu Information - dji MAVIC 2 PRO User Manual

Mavic 2 Pro/Zoom User Manual
Ensure the aircraft is connected to the computer before powering on.
The firmware update will take around 15 minutes. It is normal that the gimbal goes limp,
aircraft status indicators blink, and the aircraft reboots. Please wait patiently until the update is
complete.
Ensure the computer has access to the Internet.
Before performing an update ensure the Intelligent Flight Battery has at least 50% power and
the remote controller has at least 30% power.
Do not disconnect the aircraft from the computer during an update.
For safety, always update the firmware to the latest version when an upgrade notification is
shown in DJI GO 4.
Firmware upgrade notifications will prompt you to proceed with an update immediately or to
update the firmware within three days. If you choose to ignore the current firmware update, you
are required to accept the prompted disclaimer. You further understand and agree that the data
includes but is not limited to user selection records and may be uploaded to and maintained on
a DJI designated server.
The remote control device may become unlinked from the aircraft after updating. Re-link the
remote control device and aircraft.
Be sure to check all connections and remove the propellers from the motors before performing
the firmware update. DO NOT disconnect the aircraft or remote controller from the computer or
internet while updating the firmware.

Remote Controller LCD Screen Menu Information

Remote Controller Status
BAT xx PCT
SHUTDOWN_
CHARGING_
USB PLUGGED
FC U-DISK
UPGRADING
BINDING
Before Flight
CONNECTING_
SYS INITING
READY TO GO
Flight Mode
BEGINNER
GPS MODE
OPTI MODE
ATTI MODE
SPORT MODE
Flight Status
TAKING OFF
LANDING
GOING HOME
©
66 2018 DJI All Rights Reserved.
Remote Controller battery level.
Remote controller is powering off.
Remote controller is charging.
Mavic 2 has been connected to a computer.
Flight Controller is reading data.
Upgrading.
Aircraft is binding with the remote controller.
The remote controller is connecting to the aircraft.
System is initiating.
Ready to take off.
In Beginner Mode.
In P-GPS Mode.
In P-OPTI Mode.
In P-ATTI Mode.
In Sport Mode.
Taking off.
Landing.
Returning to Home.