Return To Home - dji MAVIC 2 PRO User Manual

Return to Home

The Return to Home (RTH) function brings the aircraft back to the last recorded Home Point. There are
three types of RTH: Smart RTH, Low Battery RTH, and Failsafe RTH. This section describes these three
scenarios in detail.
GPS
Home Point
Smart RTH
If the GPS signal is sufficiently strong, Smart RTH can be used to bring the aircraft back to the Home
Point. Smart RTH is initiated either by tapping
instructions) or by pressing and holding the RTH button on the remote controller.
Exit Smart RTH by tapping
controller.
Low Battery RTH
Low Battery RTH is triggered when the Intelligent Flight Battery is depleted to the point that the safe
return of the aircraft may be affected. Return home or land the aircraft immediately when prompted. DJI
GO 4 will display a warning when a low battery level warning is triggered. The aircraft will automatically
return to the Home Point if no action is taken after a ten-second countdown. The user can cancel the
RTH procedure by pressing the RTH button or Flight Pause button on the remote controller.
If the RTH procedure is cancelled following a low battery level warning, the Intelligent Flight Battery may
not have enough charge for the aircraft to land safely, which may lead to the aircraft crashing or being
lost. The thresholds for the battery level warnings are automatically determined based on the aircraft's
current altitude and distance from the Home Point.
The aircraft will land automatically if the current battery level can only support the aircraft long enough
to descend from its current altitude. The user cannot cancel the auto landing but can use the remote
controller to alter the aircraft's orientation during the landing process.
Critically low battery level warning
If a strong GPS signal was acquired before takeoff, the Home Point is
the location from which the aircraft launched. The GPS signal strength is
indicated by the GPS icon (
green quickly when the Home Point is recorded.
in the DJI GO 4 app or by pressing the RTH button on the remote
(Red)
Low battery level warning
(Yellow)
return to Home Point
DJI GO 4 Battery level Indicator Bar
Description
). The Aircraft Status Indicator will blink
in the DJI GO 4 app (and following the on-screen
Battery level is
sufficient (Green)
Remaining flight time
Charge required to
Mavic 2 Pro/Zoom User Manual
12:29
©
2018 DJI All Rights Reserved. 15