SPA-1xxx/2xxx/3xxx Configuration
Using your telephone handset obtains the IP address of the ATA:
1. Dial **** to enter the Linksys Configuration Menu
2. Dial 110# to get the IP address of the Linksys
3. Write down the IP address of the Linksys.
4. For some models, you may then need to dial 7932#, then 1#,
then 1 to enable the web server of the Linksys ATA.
Enter the IP address of the Linksys in your browser's address bar to access
the configuration menu.
If you are experiencing difficulty trying to connect to the device at this point, try
step #4 above. If you still have problems after this please refer to the user
guide or contact Linksys Technical Support for further assistance.
VoIP Configuration
Once you have logged into the Configuration Center, click the ADMIN LOGIN
link on the top right hand side of the page. Next, click the ADVANCED link
next to it.
If you have a Linksys ATA with a built-in router, such as the SPA-3102, you
will then need to click the VOICE tab at the top of the page.
For more information regarding each property and option, please refer to the
user manual.
Figure 1.1